Stainless steel corrosion oilite bushings SF-1S

Stainless steel corrosion oilite bushings SF-1S

1.material is stainless steel, alloy powder, ptfe etc
2.Good quality and price concessions, quality service
3. Type: Sleeve

Product description

SF - 1S stainless steel corrosion resistant bearing, is among the matrix of stainless steel materials, corrosion resistant alloy powder sintering surface rolling with ptfe gives priority to the low friction material, after rolling forming a kind of very effective anti-corrosion materials. It has can withstand oil, acid alkalis, seawater and wear resistance of the characteristics of PTEE materials, surface without lead ingredients. In food &beverage machinery, printing and dyeing machinery, chemical machinery, Marine industrial corrosion sliding parts is most suitable for use.

Technical parameters

The maximum load pressure: 140N/mm2

Applicable temperature range: - 195 ~ + 280 degrees Celsius

Maximum sliding speed: 2.5 m/s

Friction coefficient: 0.04 ~ 0.20

Allow the highest PV value (dry) : 3.6 N/mm2. J m/s

Allow the highest PV value (oil) : 50N/mm2. J m/s

Application characteristics:

1. PTFE, kiss oily fiber mixture in the sports can form good transfer membrane protection on grinding axis.

2. Good wearproof ability, low friction coefficient.

3. ZouGe performance is good, no bite shaft phenomenon.

4. Can be used for rotating, swing, reciprocating campaign.

5. Corrosion resistant performance is good.

6. Because without lead, it can be used in food machinery, medical machinery and so on green environmental protection equipment.

7. Typical application: mainly used in acid or alkali situations, such as: chemical in acid and alkali flowmeter, pump, valve, printing and dyeing machinery,

Marine industrial corrosion sliding parts.

SF - 1S series chemical characteristics

Bearing type vacuum in water vapor in the air in dilute acid in alkaline acid solution

SF - 1S good good good good well or no good