SKF Four-Point Contact Ball Bearings QJ 308 N2MA Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads acting in both directions. Radial loads can be supported up to a certain fraction of the axial load. These bearings take up considerably less axial space than double row bearings. SKF four-point contact ball bearings of the QJ design have a contact angle of either 35° Or 45° .

Double Row Angular Contact Ball Bearing 3008-B-Tvh Double row angular contact ball bearing 3008-B-TVH 1)Description: *Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. Their construction is similar to a pair of single row angular contact ball bearings in an O arrangement but they are narrower to a certain extent

2, Deep groove ball bearing This kind of bearing been used more,could load radial load and subject to bi-directional load,used to the environment of low noise,low frequency and tail-wagging . Ball bearing shielded or frommet,,which on the sealed type bearings are fill in some grease. Snap ring on the circle or flange,which on the bearings,it is easy for locationand and setting for bearings. The peak load bearing and normal bearing has the same size

Drawn cup needle roller bearing is widely used in power tools, motorcycles, textile machines etc... Outer ring for FBX brand drawn cup needle roller bearing is fine pressed with steel strip, bearing with this kind of structure possesses small space, and has higher loading capacity. They are suitable for applications with limited space and housing is not hard enough to act as raceway. The shaft surface can be used as the raceway while hardened and ground.

1)Needle Roller Bearings, Needle Cage Assembly, Drawn Cup Needle Roller Bearings, Thrudt Needle Roller Bearings Are Suitable for Small Space ANd High Load capacity. Widly Used For gear Driving System, Turning System Of Auto Mobile, Connecting Rod etc. 2)Drawn Cup Needle Roller Bearings Drawn Cup Needle Roller Bearings HK BK series Sealed Drawn Cup Needle Roller Bearings HK...RS, HR...2RS, BK...RS series Drawn Cup Full Complement Needle Roller Bearings

1, sealed angular contact ball bearings to solve difficult problems Angular contact ball bearings is mainly used in machine tool spindle. In most cases, locking the outer ring of this bearing the mouth and can not seal the resulting circular groove, so many used in the machine spindle angular contact ball bearings can not be used for other hosts as the other bearings as lubrication. If installing a set of auxiliary lubrication system,

ntn bearing angular contact ball bearings is mainly used in machine tool spindle. In most cases, locking the outer ring of this bearing the mouth and can not seal the resulting circular groove, so many used in the machine spindle angular contact ball bearings can not be used for other hosts as the other bearings as lubrication.If installing a set of auxiliary lubrication system, not only to increase costs and make the structure more complex machine.