You are here: Home > Stud Type Track Roller Bearing

Ball Bearings

Double row stud type track roller bearing NUKRE52

Double row stud type track roller bearing NUKRE52 1.Raw material: O.R.16NiCr4, I.R. 18NiCr4, thrust washer 18NiCrMo5, Rollers 100Cr6. 2.Tolerance: DIN620, 3.Precession: P0, Stud type track roller of this series are full complement cylindrical roller bearings made according to DIN620. The thick walled outer ring in high quality and casehardened steel is of the same type as the one used for the LIBE yoke type track rollers of series ''TR'' and therefore offers the same high reliability and technology.

Double row stud type track roller bearing NUKRE52

Single and double row yoke&stud type track roller bearing NUKR40 NUKR35 NUKR47

1.Stud type track roller bearing 2.Material: GCR15. 3.provide:KR,KRE,KRV,NUKR,NUKRE,PWKRE SERIES Stud type track rollers bearing Stud type track rollers are similar in their construction to single and double row yoke type track rollers, except that the raceway is formed by a heavy-section roller stud with a fixing thread and lubrication hole. Due to the thick-walled outer ring with profiled outside surface and the rolling element set, they can support high radial loads

Single and double row yoke&stud type track roller bearing NUKR40 NUKR35 NUKR47
Page:[«]1[»]