Bearing installation should be based on bearing structure, size and bearing components with the nature of the pressure should be directly added to the tight end with the ring surface was not passed through the rolling pressure, bearing installation method:  1. Heating with  Bearing or bearing by heating, using thermal expansion will be tight fit into a song with the installation. Is a common and labor-saving installation method. This method is suitable for large amount of interference bearing installation,

INA Bearing Lubrication Methods Five1, manual lubricationINA Bearing lubricant is found insufficient, the timely use of fuel oil supply device, which is the most primitive methods. This approach is difficult to maintain a certain amount of oil due to the risk of neglect and forget big oil, usually used only for light load, low speed or intermittent movement of occasions. Best hole in the fuel set dust cover or valve, with blankets,
 

Thrust Ball Bearings This type of bearings is separable, which can only carry axial load. The single direction bearings of them can only carry axial load in one direction, while the double can carry alternating axial load in either direction. Before using they have to be preloaded. The thrust ball bearings are used in lathe centers, automobile clutches, reducers and so on. The double direction angular contact thrust ball bearings are suitable for machine tool spindles,

This type of bearings is separable, which can only carry axial load. The single direction bearings of them can only carry axial load in one direction, while the doucle can carry alternating axial load in either direction. Before using they have to be preloaded. The thrust ball bearings are used in lathe centers, automobile cluches, reducers and so on. The double direction angular contact thrust ball bearigs are suitable for machine tool spindles, while the single are support ball screws.

1) Product name: Single direction thrust ball bearing. 2) Product number.: 51100, 51101, 51102, 51103, 51104, 51105, 51106, 51107, 51108, 51109, 51110 (see table below). 3) Product material: Chrome steel SAE 52100 or Stainless steel SUS 440C, SUS304. 4) Product quality: ABEC-1, ABEC-3 grade. 5) Product brand: PLB, or neutral brand, OEM service is welcome. 6) Product packing: Industrial packaging or individual box packaging.