General Bearing Appearance characteristics:Roller diameter and length of rolling are small. Cage with roller or inner guidance. Cylindrical roller bearing cage structure with rivets, easy to loose, off cover. Aligning bearing diameter hole without bunkers, poor lubrication.Material:Inside and outside the ring and rolling the ordinary bearing steel. Of zinc brass cage materials, low strength, poor flexibility.

1: ntn bearing cleaning focus:1, cleaning the surface of the object stateSmooth surfaces and rough uneven surfaces cleaned the same way, the effect achieved is very different. In the choice of cleaning method should fully take into account the surface conditions.2, the situation of dirtDirt to be used for different a different cleaning agent for metal surface with oil-based dirt and to scale, oxide-based dirt the selected cleaning agent

Identification of the Quality of the sound description:Irregular use of hearing to identify the operation is a very common method. For example: With the electronic stethoscope to check does not feel a part of the normal noise often experienced operators to use the method.ntn bearings are well connected to the switch if the state will issue a muffled whining sound. If issued a sharp hissing sound,

1: ntn bearing support seal:ntn bearing support sealing means bearing external, such as ntn bearing shell parts, shaft parts, and cover part of the additional sealing devices.Bearing seals in the choice of bearings should be considered when the bearing lubricant type (fat or oil), sealing contact with the surface of the circular speed, bearing misalignment, and many other factors.

ntn bearing angular contact ball bearings is mainly used in machine tool spindle. In most cases, locking the outer ring of this bearing the mouth and can not seal the resulting circular groove, so many used in the machine spindle angular contact ball bearings can not be used for other hosts as the other bearings as lubrication.If installing a set of auxiliary lubrication system, not only to increase costs and make the structure more complex machine.

 ntn bearing lubrication methods introduced 41, oil ring lubrication: lubrication only way for the horizontal axis. By hanging in the shaft and can rotate the ring to the oil pool oil into the bearing. Applicable to medium-speed shaft diameter greater than 50mm and high-speed bearings. Oil ring preferably seamless, bearing wide-diameter ratio less than 2, may use only one oil ring, Otherwise required two oil ring.

1: ntn bearing the international standards:China Bearing Industrial Association (CBIA)American Bearing Manufacturers Association (ABMA)American National Standards Institute (ANSI)Japanese Industrial Standards Committee (JISC)Standards Engineering Society
International Organization for Standardization (ISO)Scandinavian Bearing Association (SBA)German National Standards Organization (DIN)
Japanese Standards Association (JSA)Typically, ntn bearing the criteria used are ISO standards.

ntn bearing support choose to pay attention to four problemsFirst, how to limit the axial position, including the radial and axial position are the first issues to consider. General dual-axis multi-support structure, the radial shaft supported by two co-limited, each supporting Department should play the role of radial positioning or angular contact bearings to the heart.Second, the axial position of supporting the restrictions by the two axial displacement in one direction is also limited by a supporting axial displacement in both directions,