Single row deep groove ball bearings can accommodate radial and thrust loads and can be used at high speeds. Deep groove ball bearings are non-separable. The self-aligning capacity of deep groove ball bearings is limited. Sealed deep groove ball bearings are maintenance-free and make simple constructions possible. Thanks to these capabilities and their competitive price, they are the most commonly used bearings. Deep groove ball bearings are available as open basic design and with seals
Miniature bearings carry moderate radial and thrust loads at low operating torque and provide high performance within small envelope designs. We offer a complete line of miniature bearings that are available in carbon, chrome, stainless steel and ceramic, with either crown or ribbon type retainers. Bearings are also available open or shielded, flanged or unflanged, and with a variety of seal options to suit any engineering need.
Angular contact ball bearings can be used to support radial and axial loading at the same time. Because the single row angular contact ball bearing can take axial loading only in single direction, matched bearings are often adopted. When used in pairs of bearings, it is convenient to adjust them. The material that to make into the cage are brass, synthetic resins and so on, they are divided pedestald on the bearing features and use environment.
Angular contact ball bearing can carry radial load and axial load at the same time, meanwhile, it can also endure pure axial load, together with high limited speed. The carrying capacity of axial load is decided by the contact angle, the bigger contact angle, the higher carrying capacity of axial load. The definition of contact angle α Is the angle formed by the line upright with axes of bearings and the line which connect the grounders and contact of rollaway.
The raceways of both the inner and outer rings of these non-separable bearings are made with set contact angles. The balls are inserted using counter-bore construction, which allows a larger number of balls to be installed than in deep-groove ball bearings. Single-row angular contact ball bearings can sustain radial, axial and momentary loads. However, any axial load must be applied in one direction. Due to their design, angular contact bearings will experience some
Single row angular contact ball bearing 7000C 7000AC 7200B 7001C 7001AC 7201B 7002C 7002AC 7202B 7003C 7003AC 7203B 7004C 7004AC 7204B 7005C 7005AC 7205B 7006C 7006AC 7206B 7007C 7007AC 7207B 7008C 7008AC 7208B 7009C 7009AC 7209B 7010C 7010AC 7210B 7011C 7011AC 7211B 7012C 7012AC 7212B 7013C 7013AC 7213B 7014C 7014AC 7214B 7015C 7015AC 7215B 7016C 7016AC 7216B