You are here: Home > Large Tapered Roller Bearing

Ball Bearings

Steel And Brass Single Row Tapered Roller Bearing 31000, 33000, 33100, 33200 series

Steel And Brass Single Row Tapered Roller Bearing 31000, 33000, 33100, 33200 series Taper Roller Bearing Brand GLXE,FAG,NSK,SKF and etc Series 30200 series, 30300 series, 32000 series, 32200 series, 32300 series, 31000 series, 33000 series, 33100 series 33200 series, non-standard series. Type Single-row taper roller bearing,taper roller thrust bearing ,Large bearing. ID Size 17-360mm Cage Material Steel ,Brass Precision P0,P4,P5,P6

Steel And Brass Single Row Tapered Roller Bearing 31000, 33000, 33100, 33200 series

Large Double Row And Four Row Tapered Roller Bearing L814749/L814710DC

Double Row And Four Row Tapered Roller Bearing L814749/L814710DC Tapered roller bearings are widely used in automotive, mill, mine, metallurgy, plastics and machinery. Features: Tapered roller bearings with radial oriented mainly to bear radial and axial joint load. Bearing load capacity depends on the angle of the outer ring raceway, the greater the angle the greater the carrying capacity. This kind of bearing is separable bearings, rolling bearings according

Large Double Row And Four Row Tapered Roller Bearing L814749/L814710DC

Large NSK Double Row Tapered Roller Bearings (32013)

Large NSK Tapered Roller Bearings (32013) Tapered roller bearings are bearings that can take large axial forces (I. E., they are good ) as well as being able to sustain large radial forces. The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. This conical geometry is used as it gives a larger contact patch

Large NSK Double Row Tapered Roller Bearings (32013)

Taper Roller Bearing

Tapered roller bearings are bearings that can take large axial forces as well as being able to sustain large radial forces. The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings,

Taper Roller Bearing
Page:[«]1[»]