Steel+Bronze+PTFE Flanged Oilless Bushing (Split Plain Bearing) Description: Metal-polymer-composite material Steel + porous bronze sinter + PTFE Self-lubricating & Maintenance-free Structure: Sliding layer ( PTFE ) Porous bronze sinter layer Steel backing Tin plated Features: Flanged bushing material has very good wear and friction performance over a wide range of loads, speeds and temperature conditions. Flanged bushing material also performs well with lubrication.
Solid Lubricating Bearing (500# JDB) Bronze Bushing Solid Lubricating Bearing, Material: CuZn25Al6FeMn3 + Graphite Description: Material: CuZn25Al6FeMn3 + Graphite Hardness: >190HB Self-lubricating & Maintenance-free Features: High load capacity, very good wear and abrasion resistance, moderate corrosion resistance, hardened mating material favorable. Special suitable for toggle mechanism bushing in injection molding machines. Possible Applications:
Self-Lubrication Gear Oil Pump Bushing (Split Plain Bearing) Gear oil pump bushing 1. PTFE with lead 0.01~0.03mm 2. Porous bronze 0.2~0.3mm 3. Steel backing 0.7~2.3mm 4. Tin-plating 0.005mm or copper plating 0.008mm Introduction: Gear oil pump bushing is a new kind of GFB-1 which composes of a specially designed surface layer of PTFE formulations and is specifically applied for the high PV bushes of gear oil pumps. Gear oil pump bushing is to be used
Oilless bushing SF-1S Stainless Steel sliding bearing bushing 1,Oilless bush SF-1 Self-lubricating bearings 2,According to customer's requirement. 10,High quality and good service. oilless bushing ,Bimetal bearing bushing,Self-lubricating bearings SF-1S is of oil resistant,acid resistant,alkali resistant and seawater resistant,more over, there is no lead in the PTFE surface layer and so is particularly fit for application in food machinery, alkali flow meters,pumps
Wrapped Stainless Steel Bushing DU/DX; SF-1 / SF-2 (Oilless Slidng Series) Stainless Steel Bushing is wrapped by steel backing, Sintered bronze layer and PTFE antiwear surface. QS: DIN / JIS / GB Oilless Slidng Series: DU Bushing Steel Plate Self-Lubricating Bushing Briefing: Stainless Steel Bushing /SF-1 Self Lubricating Bushing is wrapped by steel backing, Sinter bronze inter layer and PTFE antiwear surface. It is wildly used in hydraulic gear pumps, oil cylinder,
Self-lubricating stainless steel bushing (sliding bearing) SF-1S Stainless steel bushing 1.stainless steel back,sintered bronze,PTFE layer 2.oilless,self-lubricating 3.low wear,low friction Stainless steel bushing introduction: 1、Stainless steel bushing has a common structure, consisting of a stainless steel backing bonded to a porous bronze sinter layer with filled PTFE on its surface. 2、The color of Stainless steel bushing's inner layer is black. Stainless steel bushing
Self-lubricating bronze oilless bushing SF-2 (wrapped sliding bearing) bronze bushing 1.SF-2 boundary lubrication bearing 2.Minimum coefficient of friction 3.Passed ISO 9001 and TS 16949 Advantages at a glance 1.Minimum coefficientof friction for solid materials 2. Maintenance free and self-lubricating 3.Minimum stick-slip effect 4.High pU (PV) for absolute dry-running and stability 5.Takes up edge loading and compensates for misalignment 6.Eliminates noise
SF-1X(DU) Self-lubricating sliding bearing (Bushing) Metric and inch series SF-1X(DU): Steel DC01 + Sintered bronze ball(CuSn8Zn3) + 1X PTFE filler with Pb. 1X PTFE filler is the pre-embedded lubricant SF-1X(DU): Steel DC01(ST12) + Sintered bronze ball(CuSn8Zn3, 0.25~0.35mm) + 1X PTFE filler with Pb. 1X PTFE filler is the pre-embedded lubricant, so it could be used where the oil is hard to be added. It is maintenance free and has long service life. Performance: