Data show that the wear and tear caused by mechanical failure or the main reason for the early, more than half of all management and lubrication technology. Improve lubrication management, and prevention of bearings, gears and other moving parts friction abrasions or sintering, to prevent and reduce wear, friction reduction, accident prevention equipment, improve equipment efficiency; saving energy, improving energy utilization efficiency,
1. Through the work to identify the temperatureThis method is more recognition method is limited to use in running condition is not change the situation. To this end, the temperature must be continuously recorded. Fails, not only temperature but also irregular changes.2. Through voice identificationTo identify needs through sound experience. Must be adequately trained to be able to identify the voice bearing and non bearing sound
INA Bearing Lubrication Methods Five1, manual lubricationINA Bearing lubricant is found insufficient, the timely use of fuel oil supply device, which is the most primitive methods. This approach is difficult to maintain a certain amount of oil due to the risk of neglect and forget big oil, usually used only for light load, low speed or intermittent movement of occasions. Best hole in the fuel set dust cover or valve, with blankets,
1, ntn Bearing Parts Material Imported bearing cage play an equal distance in the rolling bearing isolation to prevent the ball rolling and falling, to guide and promote the role of ball rotation. Can be divided into stamping rolling bearing cage and solid cage. Rolling at work, as a result of sliding friction and wear of bearings fever, especially in the high-speed operation conditions, due to the centrifugal force,
1, bearing inspection and repair technology1, ntn bearing cleaning Bearing Maintenance imported under demolition, the first recorded appearance of bearing, lubricant residue confirmation sampling after checking with the lubricant, cleaning bearings. As cleaning agents, general use gasoline, kerosene. Remove the bearings to cleaning, sub-rough cleansing and washing small fine, were in the container, first put metal mesh bottom,
FAG Bearing of physical characterization of a vibration displacement, velocity, acceleration of three.FAG Bearings by the design parameters identified stiffness, flexibility, quality, and damping vibration system posed by conditions in the operation phase will have to adapt to its mechanical vibration.Manufacturing and processing of the error caused by vibration, the smaller the deviation, vibration smaller.
fag bearings running smooth running strong mechanical protection and the premise that we should pay attention to the process of using the future maintenance of your bearings.1, fag bearings must be standardized, see instructions before use. fag bearing instructions and sample can be obtained from Tianjin imported bearings Meites;Second, fag bearings must be inspected regularly during maintenance
1: ntn bearing nature of the noise:1. Rolling sound and control the impact of large models of ball bearings or cylindrical roller bearings ntn pure radial load low speed operation, due to the centrifugal force rolling small area in the non-load rolling element will impact or roller and cage noises. But with the speed increase, this sound will disappear. Impact of sound on the ball control methods: the radial clearance appropriate to reduce the use of reasonable structure of the material is supple nature of the bearing cage.