Bearing used life cycle extended method

1, bearing installation
Bearing installed correctly, affecting precision, long life, a performance. Therefore, design and assembly department for bearing installation should fully research. Hope according to operation standard for installation. The program usually operation standard are as follows:

(1) cleaning bearings and bearing interrelated components
(2) check interrelated parts size and finishing
(3) installed
(4) installed bearing the check after
(5) supply lubricant

2, the firm, straightening
After installing the bearings, if not careful, straightening the firm could lead to suffer another load bearing, friction and vibration. These may accelerate fatigue and reduce the service life of the bearings, and could damage other machine parts use period. In addition, the vibration and friction might increase greatly increase energy consumption and premature failure risk.

3, basic condition monitoring
In use period, usually on the bearing the basic operation external conditions, such as temperature monitor, vibration and noise measurement, etc. These regular inspection will early detection of potential problems and will prevent unexpected phenomenon, make the machine to suspend production plan implemented, improve productivity and efficiency of the factory.

4, again lubrication
In the process of the right, bearing request again, perfect its performance lubrication. Bearing lubrication method, divided into grease-lubricated and oil lubrication. In order to make bearing good use function, above all, want to choose the suitable conditions of use, the lubrication methods used purpose. If only consider lubrication, oil lubrication lubricity, colo. But can simplify bearing grease surrounding structures are the specialty.Radial Spherical Plain Bearing Rod End Spherical Plain Thrust Bearing

5, remove
When bearing will reach its final use period of time, it should be replaced. Although bearing can no longer be used, but properly remove the original bearing, promptly replace new bearing on a new life expectancy of bearings use can have very good stimulative effect. First, remove the method of appropriate USES will help prevent tool for other machine components and, second, not correct damaged the technology may unload cause harm to the operator.