You are here: Home > NSK bearing the method of the examination

Ball Bearings

NSK bearing the method of the examination

NSK bearings of the review, to maintain current NSK bearings at its best is a main task, can also show inventions problem. For use in NSK bearings shall pay more attention to in the item and coherent sense.

First of all, we want to emphasize, maintain the NSK bearing smooth and clean is very important.

So when we NSK bearings to review, should lead before NSK bearing appearance, clean and surrounding parts assembly bearing. We should pay attention to, oil seal is very weak parts, so the review and disassembling the alert, especially when need, so do not moderate force formed part of damage. Then careful review of oil seal NSK bearings and its surrounding parts, if already pictured bad symptoms, be sure to switch off, bad oil seal would incur bearing damage, make the NSK bearing formed cloud-shaped abnormal equipment of the stop.

Second, we will review the NSK bearing smooth agent.

Smooth is very main, not just for the NSK bearings, but for all the export bearings. However please notice, FAG bearing shoulds not be too smooth add fat.

NSK bearing smooth agent for the review way as the:

With little smooth agent in between two fingers, if have purify things friction can be felt in existence, the; Or in hand back a thin layer of smooth agent with; but do sealing light review behind.

NSK bearings is changed and smooth agent.

Using oil slick NSK bearings used in oil, diarrhoea, you should again if can into the novel oil and let the machine in low speed rotating a few minutes. Try to make oil collecting residual purification content and then diarrhea except these oil. Attention: oil in use by filtering before had better.

And the use of slippery fat smooth NSK bearings in change when sliding fat, use of Joe except device with cotton content should be prevented pick cape to any part of the NSK bearings. Because these remaining fiber can wedge rolling piece and form in between, especially small bearing damage more needs to notice to use this problem.

Finally, need to notice is NSK bearing the cover bare.

Review the NSK bearings, must not let bearing naked in purification thing or moisture environment. If the task ceases to exist, should with oil paper-plastic film or similar material by machine. Once

If not able to perform review assembly under the condition of the bearings cleaning bare, want to be coated with oil with brush cleaning solvent (white.on survival, again with a piece of cloth fabric not dry or blow dry air with contraction notices not to make the bearings components (starting rotation).

With a small mirror and the kind of probe used similar to the dentist to review the bearing surface, keep track of devices and beads. If the bearing is not damaged shall be based on the machine, the original supply smooth interpretation or book 204 page to 2.47 pages of initiative to perform again smooth.  Deep Groove Ball Bearing Self Aligning Ball Bearings Thrust Ball Bearing

Do not clean encryption block or dustproof bearing; Only can wipe its internal appearance. If bearing is damage to switch off when namely. In the current era of the remaining downtime within than because array change bearing the selected into bearing damage lose more economical suddenly shutdown.


Previous:
Next: Bearing used life cycle extended method »