Contact us

Company Name:
Lishui Huanqiu Bearing Trading Co., Ltd.

Company Address:
No.11 Shiting Road, Shuige Industrial Zone,Lishui, Zhejiang,China
Contact Person: William

Email: admin@tradebearings.com
Homepage: www.asiabearings.com
Bearing B2B: www.tradebearings.com

email

 

Home > News >

NSK bearings 23222CC/W33 spherical roller bearings

Bearing the name of NSK 23222CC/W33 bearing
New model 23222CC/W33
Older model 3,053,222
Diameter d (mm) 110
Outside diameter d (mm) 200
B thickness (mm) 70
NSK model 23222CC/W33
Bearing brand NSK
Roller bearings with bearing type
Detailed descriptions of spherical roller bearings (20000CC/W33)
(1) tracking is not available with sealed bearing this method of cleaning, sealing internal should be adhered to as it stood could not be cleaned.
(2) will be equipped with a clean appearance, such as gasoline, kerosene, toluene or xylene solution cleaning clean, wipe with a clean cloth, and then spread a thin layer of varnish, this makes the device efficiency of lunch to operate.
(3) provisional unit open NSK bearing package, immerse it rotating liquids such as gasoline to hand in mitigation mentioned above, make sure you adhere to, rolling elements and raceways appearance of encapsulated oil is thoroughly clean.
(4) when you wash a lot of NSK bearings, 90~100℃ hot oil shower hot with temperature so that the encapsulated oil condenses, and seamless and without net exfoliation tool dig all the old oil, spraying hot for a few minutes, and then rinse it with kerosene oil, last used petrol to clean it again. After the wash, wear bearings are in the stage of film gloves dry on a clean cloth or paper.


Other News:
NSK bearings 23222CC/W33 spherical roller bearings
SKF bearings 23220CCK/W33+H2320 spherical roller bearings
FAG bearings 23296CACK/W33 spherical roller bearings
SKF bearings 23220CCK/W33+H2320 Roller bearings with
FAG bearings 24038 CC/W33 spherical roller bearings
SKF bearing Raceway noise analysis and rust maintenance method
Select FAG bearings based on static load carrying capacity method
Analysis of reasons for early damage of TIMKEN bearings