Thrust ball bearings TIMKEN 53330MP+U330
Brand name TIMKEN 53330MP+U330
New model 53330 u
Older model 18,330
Diameter d (mm) 150 mm
Outside diameter d (mm) 245 mm
B thickness (mm) 83.7 mm
Reference type 53330MP+U330 bearing
Speed limit 950 r/min
Reference speed of 0 r/min
Dynamic load 415000 n
Static load 1340000 n
Brand TIMKEN
Series thrust ball bearings
Describes the thrust ball bearings TIMKEN one-way
1, manual lubrication
Found in 53330MP+U330 when there is insufficient thrust ball bearing lubricant, timely Lubricator for oil, which is the most primitive methods. This method difficult to keep oil must, the high risk of inadvertently forget to refuel, usually only used for situations where light, slow or intermittent movement. Best set at the filler neck shields or ball valves, and blankets, cotton, wool and other filtration devices.
2, the oil ring lubrication
May only be used for horizontal axis lubrication method. By hanging and can rotate the ring on the shaft in the oil pool of lubricant to the bearing. Applied to a shaft diameter greater than 50mm of medium-speed and high-speed 53330MP+U330 thrust ball bearings. Oil the best is seamless, TIMKEN bearings wide-diameter ratio is less than 2 o'clock, only one oil ring, otherwise requires two oil ring.


Other News:
TIMKEN bearings 53330MP+U330 thrust ball bearings
Ball bearings with SKF bearings 2318K+H2318
NSK bearings 51407 thrust ball bearings
TIMKEN bearings 30215 tapered roller bearings
INA bearings 260KBE30+L tapered roller bearing
FAG bearings 54415 thrust ball bearings
23092CACK/W33+H3092 FAG bearings spherical roller bearings
SKF bearings of different material types and maintenance methods