(1) force Heli whenever possible through the axis of the SKF bearings, this requires a uniform point of application symmetrically and smoothly, through the force of the sphere, or parallel to the axis.
(2) the size of the force should be smooth and uniform, not shocks, this requires the use of oil or to impose a tool for smooth tension or pressure, would certainly have a hammer is also do not fall through the copper sleeve soft scrap metal to be buffered, strike force as mitigation. It is best to use copper or copper hammer hammer.
(3) avoid the rolling force, this required assembling and dismantling the inner ring (shaft washer), through the inner ring of force, when assembling and dismantling the outer ring) by applying pressure in the outer ring.
(4) the drag force to be sustainable to the extent, for example when mounting SKF bearings to just stop when filled to the correct location of the bearing force to ensure the rings (washers) the face arrives in bore or axial abutment face, neither squeezed too tightly and unable to load is not in place.


Other News:
SKF bearing when assembling and dismantling of force elements described
Analysis of NSK bearing inner ring fixation
SKF bearing type meaning
FAG bearings in use appear in the problems and their solutions
FAG bearings for the maintenance, repair, and exception handling, and countermeasures
skf bearing model description of Daquan
INA bearing overheating what is the cause
Analysis of common faults of FAG bearings which